diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index cce7405..5f86ef9 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -25,10 +25,6 @@
 obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
 endif
 
-ifneq ($(CONFIG_LS2085A),)
-obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
-endif
-
 ifneq ($(CONFIG_LS1043A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
 endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 4b9e209..d939900 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -538,12 +538,12 @@
 	struct sys_info sysinfo;
 	char buf[32];
 	unsigned int i, core;
-	u32 type, rcw;
+	u32 type, rcw, svr = gur_in32(&gur->svr);
 
 	puts("SoC: ");
 
 	cpu_name(buf);
-	printf(" %s (0x%x)\n", buf, gur_in32(&gur->svr));
+	printf(" %s (0x%x)\n", buf, svr);
 	memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
 	get_sys_info(&sysinfo);
 	puts("Clock Configuration:");
@@ -564,7 +564,10 @@
 	printf("  FMAN:     %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
 #endif
 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-	printf("     DP-DDR:   %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2));
+	if (soc_has_dp_ddr()) {
+		printf("     DP-DDR:   %-4s MT/s",
+		       strmhz(buf, sysinfo.freq_ddrbus2));
+	}
 #endif
 	puts("\n");
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
index 81cf470..d580a43 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -97,9 +97,13 @@
 			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) &
 			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK;
 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-	sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >>
+	if (soc_has_dp_ddr()) {
+		sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) &
 			FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK;
+	} else {
+		sys_info->freq_ddrbus2 = 0;
+	}
 #endif
 
 	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 9c69ed1..04831ca 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -20,7 +20,7 @@
 #ifdef CONFIG_FSL_LSCH3
 
 	/* Set Wuo bit for RN-I 20 */
-#if defined(CONFIG_LS2085A) || defined (CONFIG_LS2080A)
+#ifdef CONFIG_LS2080A
 	ldr	x0, =CCI_AUX_CONTROL_BASE(20)
 	ldr	x1, =0x00000010
 	bl	ccn504_set_aux
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index a76447e..0cb0100 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -18,7 +18,31 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+bool soc_has_dp_ddr(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 svr = gur_in32(&gur->svr);
+
+	/* LS2085A has DP_DDR */
+	if (SVR_SOC_VER(svr) == SVR_LS2085)
+		return true;
+
+	return false;
+}
+
+bool soc_has_aiop(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 svr = gur_in32(&gur->svr);
+
+	/* LS2085A has AIOP */
+	if (SVR_SOC_VER(svr) == SVR_LS2085)
+		return true;
+
+	return false;
+}
+
+#ifdef CONFIG_LS2080A
 /*
  * This erratum requires setting a value to eddrtqcr1 to
  * optimal the DDR performance.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index f434c44..c1229c8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -46,7 +46,7 @@
 {
 	/* Clear global data */
 	memset((void *)gd, 0, sizeof(gd_t));
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
 	arch_cpu_init();
 #endif
 #ifdef CONFIG_FSL_IFC
@@ -54,7 +54,7 @@
 #endif
 	board_early_init_f();
 	timer_init();
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
 	env_init();
 #endif
 	get_clocks();
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index ceefe43..10d17b2 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -23,16 +23,11 @@
  */
 #define CONFIG_SYS_MEM_RESERVE_SECURE	(2048 * 1024)	/* 2MB */
 
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
 #define CONFIG_MAX_CPUS				16
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT		8
-#ifdef CONFIG_LS2080A
-#define CONFIG_NUM_DDR_CONTROLLERS		2
-#endif
-#ifdef CONFIG_LS2085A
 #define CONFIG_NUM_DDR_CONTROLLERS		3
-#define CONFIG_SYS_FSL_HAS_DP_DDR
-#endif
+#define CONFIG_SYS_FSL_HAS_DP_DDR		/* Runtime check to confirm */
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1, 4, 4 }
 #define	SRDS_MAX_LANES	8
 #define CONFIG_SYS_FSL_SRDS_1
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index 9054942..702b9fa 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -206,7 +206,7 @@
 	{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
 	  CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE,
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN },
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
 	{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
 	  CONFIG_SYS_PCIE4_PHYS_SIZE, MT_DEVICE_NGNRNE,
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN },
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index d1fbde7..f71c2c1 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -9,7 +9,7 @@
 
 #include <config.h>
 
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
 enum srds_prtcl {
 	NONE = 0,
 	PCIE1,
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 56989e1..831d817 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -94,4 +94,7 @@
 #ifdef CONFIG_SYS_FSL_ERRATUM_A009635
 void erratum_a009635(void);
 #endif
+
+bool soc_has_dp_ddr(void);
+bool soc_has_aiop(void);
 #endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index d576f2e..53cd755 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -44,15 +44,14 @@
 
 #endif
 
-#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A) ||\
-	defined(CONFIG_LS2085A)
+#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A)
 /* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit
- * Similiarly for LS2080 and LS2085
+ * Similiarly for LS2080
  */
 #define CONFIG_ESBC_ADDR_64BIT
 #endif
 
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
 #define CONFIG_EXTRA_ENV \
 	"setenv fdt_high 0xa0000000;"	\
 	"setenv initrd_high 0xcfffffff;"	\
@@ -66,12 +65,11 @@
 
 /* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
  * Non-XIP Memory (Nand/SD)*/
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A) ||\
-	defined(CONFIG_LS2085A)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A)
 #define CONFIG_BOOTSCRIPT_COPY_RAM
 #endif
 /* The address needs to be modified according to NOR and DDR memory map */
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
 #define CONFIG_BS_HDR_ADDR_FLASH	0x583920000
 #define CONFIG_BS_ADDR_FLASH		0x583900000
 #define CONFIG_BS_HDR_ADDR_RAM		0xa3920000
diff --git a/board/freescale/ls2080a/MAINTAINERS b/board/freescale/ls2080a/MAINTAINERS
index 975ea2d..c8dac99 100644
--- a/board/freescale/ls2080a/MAINTAINERS
+++ b/board/freescale/ls2080a/MAINTAINERS
@@ -6,5 +6,3 @@
 F:	configs/ls2080a_emu_defconfig
 F:	include/configs/ls2080a_simu.h
 F:	configs/ls2080a_simu_defconfig
-F:	configs/ls2085a_emu_defconfig
-F:	configs/ls2085a_simu_defconfig
diff --git a/board/freescale/ls2080a/ddr.c b/board/freescale/ls2080a/ddr.c
index 56c5d96..1827ddc 100644
--- a/board/freescale/ls2080a/ddr.c
+++ b/board/freescale/ls2080a/ddr.c
@@ -7,6 +7,7 @@
 #include <common.h>
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
+#include <asm/arch/soc.h>
 #include "ddr.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -201,22 +202,24 @@
 	}
 
 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	/* initialize DP-DDR here */
-	puts("DP-DDR:  ");
-	/*
-	 * DDR controller use 0 as the base address for binding.
-	 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
-	 */
-	dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+	if (soc_has_dp_ddr()) {
+		/* initialize DP-DDR here */
+		puts("DP-DDR:  ");
+		/*
+		 * DDR controller use 0 as the base address for binding.
+		 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+		 */
+		dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
 					  CONFIG_DP_DDR_CTRL,
 					  CONFIG_DP_DDR_NUM_CTRLS,
 					  CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
 					  NULL, NULL, NULL);
-	if (dp_ddr_size) {
-		gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
-		gd->bd->bi_dram[2].size = dp_ddr_size;
-	} else {
-		puts("Not detected");
+		if (dp_ddr_size) {
+			gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+			gd->bd->bi_dram[2].size = dp_ddr_size;
+		} else {
+			puts("Not detected");
+		}
 	}
 #endif
 }
diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c
index ace0d79..00337d7 100644
--- a/board/freescale/ls2080a/ls2080a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -42,7 +42,7 @@
 	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
 	print_ddr_info(0);
 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-	if (gd->bd->bi_dram[2].size) {
+	if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
 		puts("\nDP-DDR ");
 		print_size(gd->bd->bi_dram[2].size, "");
 		print_ddr_info(CONFIG_DP_DDR_CTRL);
diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index 558cef1..7d3bfc8 100644
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -6,11 +6,8 @@
 F:	include/configs/ls2080aqds.h
 F:	configs/ls2080aqds_defconfig
 F:	configs/ls2080aqds_nand_defconfig
-F:	configs/ls2085aqds_defconfig
-F:	configs/ls2085aqds_nand_defconfig
 
 LS2080A_SECURE_BOOT BOARD
 M:	Saksham Jain <saksham.jain@nxp.freescale.com>
 S:	Maintained
 F:	configs/ls2080aqds_SECURE_BOOT_defconfig
-F:	configs/ls2085aqds_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls2080aqds/ddr.c b/board/freescale/ls2080aqds/ddr.c
index 9fb5e11..fcb0366 100644
--- a/board/freescale/ls2080aqds/ddr.c
+++ b/board/freescale/ls2080aqds/ddr.c
@@ -7,6 +7,7 @@
 #include <common.h>
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
+#include <asm/arch/soc.h>
 #include "ddr.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -201,22 +202,24 @@
 	}
 
 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	/* initialize DP-DDR here */
-	puts("DP-DDR:  ");
-	/*
-	 * DDR controller use 0 as the base address for binding.
-	 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
-	 */
-	dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+	if (soc_has_dp_ddr()) {
+		/* initialize DP-DDR here */
+		puts("DP-DDR:  ");
+		/*
+		 * DDR controller use 0 as the base address for binding.
+		 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+		 */
+		dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
 					  CONFIG_DP_DDR_CTRL,
 					  CONFIG_DP_DDR_NUM_CTRLS,
 					  CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
 					  NULL, NULL, NULL);
-	if (dp_ddr_size) {
-		gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
-		gd->bd->bi_dram[2].size = dp_ddr_size;
-	} else {
-		puts("Not detected");
+		if (dp_ddr_size) {
+			gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+			gd->bd->bi_dram[2].size = dp_ddr_size;
+		} else {
+			puts("Not detected");
+		}
 	}
 #endif
 }
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index e1a521d..b3bd40a 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -228,7 +228,7 @@
 	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
 	print_ddr_info(0);
 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-	if (gd->bd->bi_dram[2].size) {
+	if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
 		puts("\nDP-DDR ");
 		print_size(gd->bd->bi_dram[2].size, "");
 		print_ddr_info(CONFIG_DP_DDR_CTRL);
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
index 0817711d..5562917 100644
--- a/board/freescale/ls2080ardb/MAINTAINERS
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -6,11 +6,8 @@
 F:	include/configs/ls2080ardb.h
 F:	configs/ls2080ardb_defconfig
 F:	configs/ls2080ardb_nand_defconfig
-F:	configs/ls2085ardb_defconfig
-F:	configs/ls2085ardb_nand_defconfig
 
 LS2080A_SECURE_BOOT BOARD
 M:	Saksham Jain <saksham.jain@nxp.freescale.com>
 S:	Maintained
 F:	configs/ls2080ardb_SECURE_BOOT_defconfig
-F:	configs/ls2085ardb_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c
index 6c19173..a04d21b 100644
--- a/board/freescale/ls2080ardb/ddr.c
+++ b/board/freescale/ls2080ardb/ddr.c
@@ -7,6 +7,7 @@
 #include <common.h>
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
+#include <asm/arch/soc.h>
 #include "ddr.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -201,22 +202,24 @@
 	}
 
 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	/* initialize DP-DDR here */
-	puts("DP-DDR:  ");
-	/*
-	 * DDR controller use 0 as the base address for binding.
-	 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
-	 */
-	dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+	if (soc_has_dp_ddr()) {
+		/* initialize DP-DDR here */
+		puts("DP-DDR:  ");
+		/*
+		 * DDR controller use 0 as the base address for binding.
+		 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+		 */
+		dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
 					  CONFIG_DP_DDR_CTRL,
 					  CONFIG_DP_DDR_NUM_CTRLS,
 					  CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
 					  NULL, NULL, NULL);
-	if (dp_ddr_size) {
-		gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
-		gd->bd->bi_dram[2].size = dp_ddr_size;
-	} else {
-		puts("Not detected");
+		if (dp_ddr_size) {
+			gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+			gd->bd->bi_dram[2].size = dp_ddr_size;
+		} else {
+			puts("Not detected");
+		}
 	}
 #endif
 }
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 8201048..fb39af6 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -207,7 +207,7 @@
 	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
 	print_ddr_info(0);
 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-	if (gd->bd->bi_dram[2].size) {
+	if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
 		puts("\nDP-DDR ");
 		print_size(gd->bd->bi_dram[2].size, "");
 		print_ddr_info(CONFIG_DP_DDR_CTRL);
diff --git a/configs/ls2085a_emu_defconfig b/configs/ls2085a_emu_defconfig
deleted file mode 100644
index 036bb6f..0000000
--- a/configs/ls2085a_emu_defconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080A_EMU=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="EMU,SYS_FSL_DDR4, LS2085A"
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_MISC is not set
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/ls2085a_simu_defconfig b/configs/ls2085a_simu_defconfig
deleted file mode 100644
index 0702bab..0000000
--- a/configs/ls2085a_simu_defconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080A_SIMU=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SIMU, LS2085A"
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_MISC is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/ls2085aqds_SECURE_BOOT_defconfig b/configs/ls2085aqds_SECURE_BOOT_defconfig
deleted file mode 100644
index f13ee41..0000000
--- a/configs/ls2085aqds_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080AQDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_DM_SPI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A, SECURE_BOOT"
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_CONTROL=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SYS_NS16550=y
-CONFIG_FSL_DSPI=y
-CONFIG_RSA=y
diff --git a/configs/ls2085aqds_defconfig b/configs/ls2085aqds_defconfig
deleted file mode 100644
index a5c8388..0000000
--- a/configs/ls2085aqds_defconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080AQDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_DM_SPI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A"
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_CONTROL=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SYS_NS16550=y
-CONFIG_FSL_DSPI=y
diff --git a/configs/ls2085aqds_nand_defconfig b/configs/ls2085aqds_nand_defconfig
deleted file mode 100644
index d355c9a..0000000
--- a/configs/ls2085aqds_nand_defconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080AQDS=y
-CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND,LS2085A"
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/ls2085ardb_SECURE_BOOT_defconfig b/configs/ls2085ardb_SECURE_BOOT_defconfig
deleted file mode 100644
index aa66508..0000000
--- a/configs/ls2085ardb_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080ARDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_DM_SPI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A, SECURE_BOOT"
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_CONTROL=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SYS_NS16550=y
-CONFIG_FSL_DSPI=y
-CONFIG_RSA=y
diff --git a/configs/ls2085ardb_defconfig b/configs/ls2085ardb_defconfig
deleted file mode 100644
index fe46dbc..0000000
--- a/configs/ls2085ardb_defconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080ARDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_DM_SPI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A"
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_CONTROL=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SYS_NS16550=y
-CONFIG_FSL_DSPI=y
diff --git a/configs/ls2085ardb_nand_defconfig b/configs/ls2085ardb_nand_defconfig
deleted file mode 100644
index 5fb0cf6..0000000
--- a/configs/ls2085ardb_nand_defconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080ARDB=y
-CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND,LS2085A"
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/doc/device-tree-bindings/serial/8250.txt b/doc/device-tree-bindings/serial/8250.txt
index 91d5ab0..ba8edae 100644
--- a/doc/device-tree-bindings/serial/8250.txt
+++ b/doc/device-tree-bindings/serial/8250.txt
@@ -53,7 +53,7 @@
 
   Represents a single port that is compatible with the DUART found
   on many Freescale chips (examples include mpc8349, mpc8548,
-  mpc8641d, p4080 and ls2085a).
+  mpc8641d, p4080 and ls2080a).
 
 Example:
 
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index 3fc418a..8bc517d 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -545,12 +545,12 @@
 
 	/*
 	 * Modifying CAAM Read/Write Attributes
-	 * For LS2080A and LS2085A
+	 * For LS2080A
 	 * For AXI Write - Cacheable, Write Back, Write allocate
 	 * For AXI Read - Cacheable, Read allocate
-	 * Only For LS2080a and LS2085a, to solve CAAM coherency issues
+	 * Only For LS2080a, to solve CAAM coherency issues
 	 */
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
 	mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0xb << MCFGR_AWCACHE_SHIFT);
 	mcr = (mcr & ~MCFGR_ARCACHE_MASK) | (0x6 << MCFGR_ARCACHE_SHIFT);
 #else
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index d2b8b5c..1811b0f 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -356,6 +356,12 @@
 }
 
 #ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+
+__weak bool soc_has_aiop(void)
+{
+	return false;
+}
+
 static int load_mc_aiop_img(u64 aiop_fw_addr)
 {
 	u64 mc_ram_addr = mc_get_dram_addr();
@@ -363,6 +369,9 @@
 	void *aiop_img;
 #endif
 
+	/* Check if AIOP is available */
+	if (!soc_has_aiop())
+		return -ENODEV;
 	/*
 	 * Load the MC AIOP image in the MC private DRAM block:
 	 */
@@ -1235,6 +1244,7 @@
 				aiop_fw_addr = simple_strtoull(argv[3], NULL,
 							       16);
 
+				/* if SoC doesn't have AIOP, err = -ENODEV */
 				err = load_mc_aiop_img(aiop_fw_addr);
 				if (!err)
 					printf("fsl-mc: AIOP FW applied\n");
diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile
index 74c4916..5587aa6 100644
--- a/drivers/net/ldpaa_eth/Makefile
+++ b/drivers/net/ldpaa_eth/Makefile
@@ -7,4 +7,3 @@
 obj-y += ldpaa_wriop.o
 obj-y += ldpaa_eth.o
 obj-$(CONFIG_LS2080A) += ls2080a.o
-obj-$(CONFIG_LS2085A) += ls2080a.o
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 13ce349..57e2a29 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -171,10 +171,9 @@
 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET    0x00F00000
 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH	    0x20000
 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET    0x00F20000
-#ifdef CONFIG_LS2085A
+/* For LS2085A */
 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH	0x200000
 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET	0x07000000
-#endif
 
 /*
  * Carve out a DDR region which will not be used by u-boot/Linux
@@ -198,10 +197,6 @@
 #define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"
 #endif
 
-#ifdef CONFIG_LS2085A
-#define FSL_PCIE_COMPAT "fsl,ls2085a-pcie"
-#endif
-
 #define CONFIG_SYS_PCI_64BIT
 
 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
diff --git a/include/configs/ls2080a_emu.h b/include/configs/ls2080a_emu.h
index 534ebb6..f4ace85 100644
--- a/include/configs/ls2080a_emu.h
+++ b/include/configs/ls2080a_emu.h
@@ -9,15 +9,8 @@
 
 #include "ls2080a_common.h"
 
-#ifdef CONFIG_LS2080A
 #define CONFIG_IDENT_STRING		" LS2080A-EMU"
 #define CONFIG_BOOTP_VCI_STRING		"U-Boot.LS2080A-EMU"
-#endif
-
-#ifdef CONFIG_LS2085A
-#define CONFIG_IDENT_STRING		" LS2085A-EMU"
-#define CONFIG_BOOTP_VCI_STRING		"U-Boot.LS2085A-EMU"
-#endif
 
 #define CONFIG_SYS_CLK_FREQ	100000000
 #define CONFIG_DDR_CLK_FREQ	133333333
diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h
index 2c2ce7b..0dbe95f 100644
--- a/include/configs/ls2080a_simu.h
+++ b/include/configs/ls2080a_simu.h
@@ -9,15 +9,8 @@
 
 #include "ls2080a_common.h"
 
-#ifdef CONFIG_LS2080A
 #define CONFIG_IDENT_STRING		" LS2080A-SIMU"
 #define CONFIG_BOOTP_VCI_STRING		"U-Boot.LS2080A-SIMU"
-#endif
-
-#ifdef CONFIG_LS2085A
-#define CONFIG_IDENT_STRING		" LS2085A-SIMU"
-#define CONFIG_BOOTP_VCI_STRING		"U-Boot.LS2085A-SIMU"
-#endif
 
 #define CONFIG_SYS_CLK_FREQ	100000000
 #define CONFIG_DDR_CLK_FREQ	133333333
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index e922e32..c5e42e6 100644
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -55,7 +55,7 @@
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
-#elif defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#elif defined(CONFIG_LS2080A)
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0